Honda B/D/H/K-Series Charge Harness

The D-series and B-series compatible wire-tuck engine harness is nearly identical to the Mil-spec engine harness line with the primary differences being the type of wire used, the single white wire color and expandable loom.

The D-series and B-series compatible wire-tuck engine harness is nearly identical to the Mil-spec engine harness line with the primary differences being the type of wire used, the single white wire color and expandable loom.

This Version 2 K-series engine harness was created to facilitate a more universal chassis, and harness routing preference. This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's Version 1 counterpart. This routing method is ideal for our (RHD) Right Hand Drive customers however NOT exclusive to RHD chassis and does work fine on a LHD chassis. Version 2 is also routed in a way that allows you to get around aggressive headers. Made in the USA

F-Series and H-series wire harnesses offer Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. New Harness NO Core Required

The D-series & B-Series OBD1 Mil-spec wire harness is cross-compatible with both engine types. This harness uses Mil-Spec Teflon coated wire with a maximum heat rating of 200°C.

This version was created to facilitate a more universal chassis, and harness routing preference. This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's Version 1 counterpart. This routing method is ideal for our (RHD) Right Hand Drive customers however NOT exclusive to RHD chassis and does work fine on a LHD chassis.

Honda and Acura B-Series Wiring Harnesses

Honda and Acura H-Series Swap Harnesses.

Honda and Acura K-Series Wiring Harnesses

Rywire Part# GROUND-KIT The Rywire ground kit features: - (1) 4 Gauge 20 inch long battery cable. (ring terminal style) - (3) 8 Gauge 14 inch long ground wires. The 3 shorter ground cables can be used for Front and Rear Transmission grounds as well as your Head/Valve cover ground. AAAll grounds are protected with DR-25 high temp shrink.