TEIN 02-06 Acura RSX Flex Z Coilovers

TEIN
Add to cart
  • Description

TEIN Part# VSA02-C1SS1

Fitment Information:
Acura RSX (2002, 2003, 2004, 2005, 2006)
Lowers 0.1" to 2.4" Front
Lowers 0.9" to 3.1" Rear
Note: BECAUSE THE ADJUSTABLE RANGE OF THE CAMBER ANGLE IS LIMITED DUE TO THE VEHICLE CHARACTERISTICS, ADJUST THE ANGLE WITHIN THE APPROPRIATE ADJUSTABLE RANGE OF THE TOE ANGLE.

FT: LEFT HAND HAS LEFT-HAND THREADS. BE SURE TO TIGHTEN IN THE CORRECT (ANTICLOCKWISE) DIRECTION. (SPRING SEAT AND LOCK)

Specs & Features

16 Way Adjustable
Full length ride height adjustment
Includes Upper Mounts with Front Camber Plates
Spring Rates: 448 lb Front and 560 lb Rear
Includes a full set of 4
12 Month Warranty
Genuine TEIN

Product Description

TEIN Flex Z Coilovers are the latest in TEIN's generation of high end coilovers.  The difference with Flex Z is that you are getting a coilover that would normally cost almost double the price.  The new manufacturing systems that TEIN has put in place with this line of coilovers has allowed for them to produce these coilovers at a lower price and pass that savings on to you.  Quality and performance remains top of it's class and TEIN builds these Flex Z coilovers with the highest quality standards in Yokohama, Japan making these a true Japanese JDM coilover system.

TEIN Flex Z has an awesome twin tube internal system that gives you one of the best street rides we've seen.  In addition, the full length height adjustment system enables you to lower the car to the max allowable level and still maintain the same shock travel and ride quality.

TEIN Flex Z is 16 way dampening adjustable (compression and rebound together) so you can made the ride stiffer or softer depending on what you are looking to achieve.  For example, you can set the dampening to a low setting for when you are daily driving the car and set it up to a stiffer/firmer setting for track or competition use.

These coilovers include upper mounts for each installation.  Each kit comes with either reinforced rubber upper mount or a pillowball upper mount.  Pillow ball upper mounts are for strut suspensions and include front camber adjustment.

TEIN takes pride in their products and each one is built to be the best quality possible.  TEIN coats each Flex Z with "ZT Coating" that prevents rust and has multiple layers to ensure the best finish.

TEIN Flex Z Coilovers Specs and Features:

Made in Yokohama, Japan
Twin-Tube for Comfortable Street Ride
Full-Length System for Height Adjustment with minimal change in ride quality even at lowest setting
EDFC Compatible
Includes Upper Mounts for Easy Installation (some vehicles use OE mounts)
Includes Dust Boots (some vehicles use OE dust boots)
TEIN Quality for durability, reliability and rust proofing
No-Sag Springs