Nippon Racing RRC Pistons are heat treated and come with a Ceramic Hard Anodized Surface Down to the second ring groove to improve heat Dissipation as well as use with Nitrous. Nippon Pistons are Equipped with 4 Cryogenically Heat Treated 22MM Wrist Pins and Teflon Coated Skirts and 8 pin locks.
ALL NIPPON RACING PISTONS SETS ARE WEIGHT MATCHED TO +/- 1 GRAM. NIPPON RACING PISTONS HAVE DEEP VALVE POCKETS TO ALLOW USE OF AFTERMARKET PERFORMANCE CAMSHAFTS UP TO STAGE 3. THESE ARE TRUE HIGH PERFORMANCE RACING PISTONS WITH A HORSEPOWER RATING OF 650 HP.
*NOTE THESE PISTONS WILL NOT WORK IN K20A3 Engines
THIS KIT IS A FULL FLOATING PISTON SET MEANING THEY ARE DESIGNED TO BE USED WITH BOTH OEM AND AFTERMARKET RODS. SEE OUR OTHER LISTINGS FOR ROD AND PISTON KIT COMBOS.
Estimated Compression Ratios Are as Follows:
87mm K24 BLOCK and TYPE S or SI Head 12.5:1
87mm K24 BLOCK and K24 Head 13.5:1
86mm K20A BLOCK and TYPE S Head 11.8:1
86mm K20A BLOCK and K20A3 Head 11.8:1
86mm K24 BLOCK AND K20 Head 13.1:1
+add 0.02 for every 0.50mm Increase in Diameter
**Rings may be substituted for GNH or Hastings depending on availability