Nippon Racing K-Series RSX Type-S Full Floating PNC PRB Pistons

Nippon Racing
Add to cart
  • Description

Nippon Racing Honda PNC/ PRB USDM K20A2 High Compression Teflon Coated Pistons. High Strength Spiral Lock Wrist Pin Clips. NPR GNC (gas nitrite coated) Performance rings**. Improved strength Full Floating 9310 Wrist Pins

**Free Shipping on all Nippon Racing Piston Sets

Fits Honda/Acura K20A1, K20A2, K20A4, K24A Engines


*86mm Currently Available for Pre-Order, Ships September 2024*

Country of Manufacture: Japan
Other Part Number: 13010-PNC-
Part Brand: Nippon Racing
Fitment Type: Direct Replacement 
Surface Finish: Teflon Coated Skirt

When you are rebuilding an engine for performance, you have got to build a good foundation.

Teflon Coated Pistons are the base of that foundation.

Teflon Coated Skirts Reduce Horse Power Robbing Friction and Piston Slap

Less slap = less noise, less cavitation (or liner pitting) and means longer cylinder liner life.

Teflon is the slipperiest material known to man. With a film of oil on the Teflon we now have a very smooth riding piston in the liner

These pistons have Holes in the wrist pin bosses to improve oiling and superior lubrication.

Piston skirts are semi-fully coated for added protection against heat.

Oem Honda pistons only have 20 percent of the skirt coated.

These pistons are domed to match OEM Honda K20A2 PNC Piston.

40 Percent stronger than OEM Honda cast pistons.

These pistons have been tested to support over 250 WHP with the proper tuning and supporting mods.

Wrist pin center to dome height has been matched to within .001"

Dome displacement has been matched to within .005 CC

This results in near identical cylinder compression, yielding more horsepower and better efficiency.

**Rings may be substituted for GNH or Hastings depending on availability
Related Products