88-91 Honda Civic/ CRX EF B-Series Swap (Cable Type)

What You Will Need:



  • B16A or B18A M/T Intermediate Shaft


  • Innovative Mounts or OEM B-Series Cable Type Swap Axles (pair)


  • B16A/ B18A Motor and B-Series Cable Transmission



  • B-Series OBD0 ECU (pr3/ pwo B16A pr4 B18A) or Other Appropriately Programmed ECU




  • Cable-Type B-Series Vehicle Speed Sensor (VSS)



  • 90-01 Integra Lower Radiator Hose


  • 90-93 Integra LS/ RS/ GS Upper Radiator Hose (B18A) or 92-93 Integra GSR Upper Radiator Hose (B16A)



  • Recommended Smaller Alternator Belt



  • 88-91 Civic / CRX SI or 5-speed DX OEM Front Spindles/ Hubs (HF/ DX 4-speed chassis only)




  • Metric Socket set 8mm – 19mm
  • 32mm Socket
  • 3/8” Short, Medium & Long Extension
  • 10mm, 12mm, 14mm, 17mm, 19mm & 22mm Open-end Wrenches
  • Die Grinder with Cut-off Wheel & Sanding Disk
  • Hammer 
  • Pry-bar, Roll-Pin Punch Set
  • Needle-Nose Pliers
  • Hose-Clamp Pliers