F/ H-Series Harnesses

Mil-Spec F-Series & H-Series Wiring harness

F-Series and H-series wire harnesses offer Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. New Harness NO Core Required

Honda B/D/H/K-Series Charge Harness

This charge harness for the starter and alternator leads. Made to use with D/B/F/H and K series tucked engine harnesses.

RW Ground Kit

Rywire Part# GROUND-KIT
The Rywire ground kit features:
- (1) 4 Gauge 20 inch long battery cable. (ring terminal style)
- (3) 8 Gauge 14 inch long ground wires.

The 3 shorter ground cables can be used for Front and Rear Transmission grounds as well as your Head/Valve cover ground.

AAAll grounds are protected with DR-25 high temp shrink.

More details
Add to cart

92-95 Civic/ Del-Sol & 94-01 Integra H22A Engine Wiring Harness Conversion

This conversion will make your EG Civic or DC2 Integra compatible with a H-Series engine. (see more details for instructions).
Note: We only support Internal coil distributors on H-Series Swaps. You can install any OBD1 coil into your External coil USDM H-Series distributor with very little modification.

90-02 Honda Accord H22A Engine Wiring Harness Conversion

This conversion will make your Honda Accord or Prelude wiring harness compatible with an H-Series engine.

Rywire Race Style Chassis Adapter Relay/Fuse Box

Race Style Chassis Adapter Relay/Fuse Box for Ry-Wire B-Series, D-Series and H-Series Tuck Harnesses
Part# RY-V3-SUB-RACE

Rywire Flying Lead Race (Universal) for B/D/H-Series

Flying Lead Race (Universal) for B/D/H-Series Harnesses Chassis Specific Adapter for Ry-Wire B-Series, D-Series and H-Series Tuck Harnesses
Part# RY-B-SUB-FLY

Mil-Spec Hondata CPR COP Harness

Mil-Spec coil harness made to use RSX/S2000 "smart" coils and the Hondata CPR kit. This harness is made to match a Mil-Spec engine harness.
More details
Add to cart

VTEC Pressure Switch Delete Bolt (Titanium)

Titanium bolt (1) is a solution to delete the VTEC Solenoid Oil Pressure switch/sensor. (sold individually)
Part# RY-TI-VTEC-BOLT
More details
Add to cart

Note: These harnesses are warrantied and guaranteed to work, we provide installation support and troubleshooting. However our engine harnesses are non-refundable, returnable or exchangeable. Please make sure that you order the correct wiring harness for your application. If you are unsure of what you need, please contact us before ordering.

All harnesses sold by Swap Shop Racing are intended for US LHD vehicles and applications only. Unless otherwise indicated. Other applications may require modification or may not be compatible.