asr_subframe_brace
When upgrading to a larger diameter swaybar, subframe tearout or pull out is quite common. Using the ASR subframe brace will help minimize any of those problems. The brace is a direct bolt on compatible with Integra Type R, Civic Type R and Mugen Swaybars. This brace can be upgraded to the ASR 32mm Hollow Bar. Comes with all necessary hardware.

ASR Sub-Frame Brace 88-91 Honda Civic/ CRX

ASR Part # EF-RB-01

ASR Sub-Frame Brace 92-95 Honda Civic

ASR Part# EG-RB-02

ASR Sub-Frame Brace 96-00 Honda Civic

ASR Part # EK-RB-02

ASR Sub-Frame Brace 90-93 Acura Integra

- ASR 6061-T6 aluminum subframe reinforcement bar
- 6061-T6 aluminum support plates
- Installation Hardware
- Installation Instructions

ASR Sub-Frame Brace 94-01 Acura Integra

ASR Subframe Reinforcement Brace 02-06 Acura RSX / 01-05 Civic

- ASR 6061-T6 aluminum subframe reinforcement bar
- 6061-T6 aluminum support plates
- Installation Hardware
- Installation Instructions

ASR 24mm Swaybar & Reinforcement KiT for the 88-91 Honda Civic and CRX EF chassis

ASR Part # EF-RBS-02

ASR 24mm Swaybar & Reinforcement Kit 92-95 Civic / 92-97 DelSol / 94-01 Integra

ASR Part # EG-RBS-02

ASR 24mm Swaybar & Reinforcement Kit 96-00 Civic

ASR Part # EK-RBS-02

ASR 32mm Hollow Sway Bar Kit - 88-00 Civic / 90-01 Integra

The ultimate bolt on swaybar set up for serious enthusiast looking to reduce weight and increase tunability.

ASR 32mm Racing Hollow Swaybar Kit 02-06 RSX / 02-05 Civic Si

The ASR 32mm Racing Hollow Swaybar Kit for the 02-06 Acura RSX was developed in conjunction with King Motorsports for their Grand Am Cup efforts. ASR complete sub frame reinforcement brace with 32mm by 2.5mm wall hollow sway bar kit for 02-06 RSX (DC5 chassis). This is the ultimate bold on sway bar setup for the serious enthusiast.

ASR Rear Subframe Brace and Sway Bar Combo 25.4mm

ASR Subframe Brace with Swaybar

ASR Red bar: 25.4 mm (1 in) Hollow, 3 position adjustable          Measured bar rate:          P1 = 73 N/mm (418 lbs/in)           P2 = 94 N/mm (533 lbs/in)           P3 = 111 N/mm (630 lbs/in)          Red bar weight: 3.15 kg (7.0 lbs)
Please Note: Some ASR products are special order depending on application and selected options. Most have a 2-4 week lead time. If you would like to check the availability of a specific part, please e-mail us or give us a call before ordering.