100% JDM Original Honda Parts

Nippon Racing JDM Civic Type-R CTR B16B Piston Set (Press Fit 81mm)

Nippon Racing Part# 13020-PCT-000
These pistons are designed for High Compression All Motor Engines with a Compression ratio of 10.92:1 to 12.5:1

-B16A Block and Head 10.95:1

-B18A/B Block and Head 11.40:1

-B18C1 Block and Head 12.40:1

-B18C1 Block and B18c5/B16A Head 12.10:1

-B18A/B Block with B18C1 Head 12.64:1

JDM ITR P73 Pistons (set of 4, Press Fit 81mm) Nippon Racing

Nippon Racing Part# P73-00. 81mm Press Fit Set with Rings, for OEM Rods.

COMPRESSION RATIOS ARE AS FOLLOWS:

81MM B18A/B W/PR3 HEAD 11.8:1

81M B18A/B W/P72 HEAD 12:1

81MM B18C W/PR3 HEAD 11.4:1

81MM B18C W/P72 HEAD 11.7:1

ADD .02 FOR EVERY .50MM IN INCREASED DIAMETER

JDM B16A P30 Pistons (set of 4, Press Fit 81mm) Nippon Racing

Nippon Racing Part# 13011-P30-000. 81mm Press Fit Set with Rings, for OEM Rods.

COMPRESSION RATIOS ARE AS FOLLOWS:
B16A BLOCK AND HEAD  10.5:1
B18A/B BLOCK W/ PR3 HEAD 12:1
B18A/B BLOCK W /P72 HEAD  12.5:1
B18C BLOCK W/ PR3 HEAD 11.5:1
B18C BLOCK W P72 HEAD  11.8:1

Wiseco B-Series Honda Piston Rings

Wiseco High Performance Piston Rings

Sold in a sets for one cylinder. Order quantity of 4 for a full set. Available in 81mm standard size or 81.25mm/ 81.5mm. 82mm oversize. Fit most B-Series Honda and Acura Pistons.

Nippon Racing Japan Prelude Type S Pistons (87mm Standard Size)

JDM Nippon Racing Honda (Japan Version) Prelude Type-S Piston w/ Ring and Wrist Pin (87mm Standard Bore) For Honda Prelude VTEC 93-01 with H22A VTEC Engine
Please note that most piston sets are not returnable or exchangeable therefore please make sure that you are purchasing the correct set for your application/ build. If you are unsure and need help placing your order please contact us.