90-93 Acura Integra DA K-Series Swap

What You Will Need:



  • K20A Intermediate Shaft



  • K20A or **K24 Motor and *Compatible Transmission


  • Conversion Harness
  • (We recommend R-Crew, or Hybrid Racing)


  • K-Series ECU with Immobilizer removed
  • (We recommend using Hondata K-PRO)


  • RSX Shifter Box & Cables


  • Throttle Cable that matches your engine


  • Custom Swap Header, Exhaust & Catalytic Converter


  • Aftermarket Fuel Rail w External Fuel Pressure Regulator and appropriate fuel lines


  • 3/8” Brake Booster Hose


  • Appropriate Radiator and Hoses


  • Radiator Fan Switch (w adapter)


  • Water Temperature Sensor (w adapter)



Please Note:

*Innovative Mounts transmission side bracket/ mount only with manual transmissions that come in the 2002+ Civic Si, 2002+ RSX or Integra.

**If you are installing a K24, you will need to purchase an additional engine bracket from Honda. This bracket is needed in-order for

the right-mount to properly bolt up to the K24 motor. Honda Part #: 11910-PPA-000



  • Metric Sockets sizes 10mm, 12mm, 14mm, 17mm, 19mm, 32mm
  • 3/8” Short, Medium & Long Extension
  • 10mm, 12mm, 14mm, 17mm, 19mm & 22mm Open-end Wrenches
  • Die Grinder with Cut-off Wheel and/or Reciprocating Saw
  • 2 Open End Adjustable Wrenches
  • Hammer
  • Pry-bar
  • Roll-Pin Punch Set
  • Large Locking Pliers
  • ½” Drill Bit
  • Drill
  • Spot Weld Drill Bit
  • Hose-Clamp Pliers
  • Felt Tipped Marker
  • Stud Extractor
  • MIG or TIG Welder for Welding Sheet Metal