AFE Part# 46-20324-R
Flow and Performance:
The aFe intercooler tubes are constructed out of mandrel bent, powder-coated texture red aluminum tubing to maximize flow. The Hot-Side tube is 2-1/4” in diameter and the cold side is 2-1/2” in diameter. The smooth transition bends decrease turbulence and minimize boost loss, which increases horsepower and torque. The aFe tubes outflow the factory tubes by 7%.

TEIN Part# SKHK8-S1B00
1" Drop Front and Rear

Buddy Club Part # BC-08-RSS-H012
Racing Spec Quick Shift Kit for the 2017+ Honda Civic Type-R FK8

Mishimoto Part# MMRAD-CTR-17S
Direct fit for the 2017+ Honda Civic Type R

Apexi Part# 145-H002 for the 2017-2019 Honda Civic Type-R
70mm Piping Diameter, SUS304 Stainless Steel

Injen Part# EVO1502
Boost up the performance of your 2017-2021 Honda Civic Type R (FK8) with Injen’s all-new EVO1502 Evolution sealed cold air intake system. The EVO1502 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel.  The EVO1502 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place.  The housing also has a molded scoop to retain the factory inlet.  This inlet helps direct cool, dense air into the intake system for maximum power!  Injen has put it all on the table to give you the greatest intake system possible!

Swift Part# 4H917R
Swift made Sport Springs keeps the quality ride you get from the showroom, and adds improved handling and lower ride height for driving enthusiasts and style minded drivers who demand only the best.

MXP Part # MXCRFK8
The Comp RS Exhaust System line from MXP introduces a more aggressive sounding system at a lower price. It’s the perfect exhaust for those seeking outright performance without the premium cost of other systems. Even though it is a value minded system, the Comp RS Exhaust System line still features many of the same advantages as the SP Spec Exhaust System line.

Remark Part# RK-C2076H-01T
The Full Titanium exhaust system is the ultimate exhaust system for the ultimate Civic.
Using REMARK design, it gives a comfortable ride without compromising FK8's potential power. Weight reduction to the maximum without cutting corners, using high grade titanium and supreme craftsmanship hand welding.

ARK Part# SM0608-0117D
Fits: Honda Civic Type R (FK8)
-Pipe Diameter: 3.0 INCH
-Tip Diameter: 4.5 INCH, TRI TIPS
-Tip Finish Options: BURNT OR POLISHED
Piping Material: T304 STAINLESS STEEL
Installation Details: BOLT ON APPLICATION. INCLUDES HARDWARE.

REMARK Part# RK-C1076H-01
Honda Civic TYPE R was designed to dominate on the tracks. The Spec-I exhaust system is crafted for racing and performance.
Using REMARK design muffler, it gives a comfortable ride without compromising FK8's potential power. Weight reduction to the maximum without cutting corners, using high grade T304 stainless steel and supreme craftsmanship hand welding. High spec exhaust system with customizable tip covers.

REMARK Part# RK-C1076H-01
Honda Civic TYPE R was designed to dominate on the tracks. The Spec-I exhaust system is crafted for racing and performance.
Using REMARK design muffler, it gives a comfortable ride without compromising FK8's potential power. Weight reduction to the maximum without cutting corners, using high grade T304 stainless steel and supreme craftsmanship hand welding. High spec exhaust system with customizable tip covers.

REMARK Part# RK-C3076H-01
Spec-III was designed for enthusiasts that desire upgrading their exhaust system and performance without compromising daily driving.
Keeping the Honda triple center-out exhaust style with increased performance and sporty tone of the FK8 (Type R). High spec exhaust system with optional tip covers, to complete your CTR design!
Drive it on the streets and full send at the tracks!

REMARK Part# REM-RK-C3076H-01
Spec-III was designed for enthusiasts that desire upgrading their exhaust system and performance without compromising daily driving.
Keeping the Honda triple center-out exhaust style with increased performance and sporty tone of the FK8 (Type R). High spec exhaust system with optional tip covers, to complete your CTR design!
Drive it on the streets and full send at the tracks!

GReddy Part# 12058002
NS1010G - 10row GReddy Oil Cooler with -10 XRP lines
Mounts behind left side of the front bumper
M20xP1.5 GREX Oil Block Adapter with built in thermostat
and ducting plate, brackets, hardware

PRL Part# HCR-FF
Increase power and torque while decreasing temps with our Plug 'N Play Flex Fuel Kit for the 2017-18 Honda Civic Type-R. All components are ethanol compatible.
No need for a wire tap or add-a-fuse!
Flex Fuel Kit is compatible with Hondata
Flex Fuel must be enabled through engine management system
Flex Fuel Tune Required

Project MU Part# PMU-PGPRH132.1
This model employs a two-piece structure for superior durability, heat resistance and heat release. Using High-alloy high-carbon FC cast-iron, this model has improved its crack-resistance dramatically and is lighter than genuine parts, with the exception of models made for some vehicle types.

APR Part# CF-917001
****Only the Center Piece of the 3 piece Cooling Plate Kit)****
The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be. To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.

APR Part# CF-917022
****Complete 3 piece Cooling Plate Kit)****
The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be. To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.

APR Part# CF-917020
****Only the Left and Right Pieces of the 3 piece Cooling Plate Kit)****
The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be. To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.

APR Part# AS-106791
With a span of 67 or 61 inches and a height of 13 inches, the GTC-300 is an adjustable wing that means serious business. The GTC-300 3D airfoil shape allows for optimal airflow that reduces drag yet supplies an effective amount of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. The results of this analysis are available here.

PR Part# AS-206791
All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. The "2D" design allows the wing to maintain a consistent level of downforce across its entire span. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Perrin Performance Part# PHP-ITR-400SL
Perrin 2017-2021 Honda Civic Type R Front Mount Intercooler (Silver)

GReddy Part# 12058101
GReddy Performance Products  Intercooler Kit
 Type-28E Core Dim: L600 / H248 / W66 mm
   (early production model will feature welded sheet metal end-tanks)
 Aluminum intercooler piping, hoses, brackets
for stock turbos or GPP turbo kit