Mishimoto Air Intake Civic Type-R FK8 2017+

Mishimoto Part# MMAI-CTR-17
Direct fit for the 2017 Honda Civic Type R
Provides max gains of 16.7 whp / 20.1 wtq while maintaining safe A/F ratios
42% increase in flow over the stock intake system with no tune required

AEM Cold Air Intake System Honda Civic Type-R 17-19

AEM Part# 21-832C
The AEM 21-832C fits 2017,2018, 2019 Honda Civic Type R models.

Takeda Momentum Pro Dry-S Cold Air Intake Civic Type-R 17-19

Takeda Part# TM-1025B-D
Get more useable power out of your FK8 Type R! The Takeda Momentum Pro DRY S Cold Air Intake outflows the factory intake, while allowing the car to breathe and perform to its greatest potential. This intake utilizes both the factory seal and air scoop, but offers a larger intake opening and filter. The Pro DRY S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.
+14 HP and +16 lbs. x ft. Torque max gains
Outflows factory intake
High Quality One-Piece Roto-Molded Sealed Housing with Air Inlet
CAD-Designed Roto-Molded Intake Tube
Pro DRY S Oil-Free washable/reusable Filter For Maximum Convenience
Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
No Cutting or Drilling on Factory Parts for Faster Installation

Takeda Momentum Pro 5R Cold Air Intake Civic Type-R 17-19

Takeda Part# TM-1025B-R
Get more usable power out of your FK8 Civic Type R! The Takeda Momentum Pro 5R Cold Air Intake outflows the factory intake, while allowing the car to breathe and perform to its greatest potential. This intake utilizes both the factory seal and air scoop, but offers a larger intake opening and filter. The Pro 5R filter consists of an oiled 5-layer mesh cotton gauze media for maximum performance and filtration. The Pro 5R maintains a 98.6% efficiency rating, allowing high air flow and optimal performance even when dirty.
+14 HP and +16 lbs. x ft. Torque max gains
Outflows factory intake
High Quality One-Piece Roto-Molded Sealed Housing with Air Inlet
CAD-Designed Roto-Molded Intake Tube

Injen 2017-2019 Honda Civic Type-R Cold Air Intake System

Injen Short Ram Air Intake System with SuperNano-Web Dry Air Filter
Injen Part# SP1583 2017+ Honda Civic Type-R FK8 2.0 Turbo 4cyl

Injen 2017+ Civic Type-R Intake System

Injen Cold Air Short Ram Intake Honda Civic Type-R 2017-2018
Injen Part# SP1582

INJEN EVO Intake System Honda Civic Type-R 17-19 FK8

Injen Part# EVO1502
Boost up the performance of your 2017-2019 Honda Civic Type R (FK8) with Injen’s all-new EVO1502 Evolution sealed cold air intake system. The EVO1502 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel.  The EVO1502 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place.  The housing also has a molded scoop to retain the factory inlet.  This inlet helps direct cool, dense air into the intake system for maximum power!  Injen has put it all on the table to give you the greatest intake system possible!

PRL Intake System Honda Type-R 17-19 Stage 1

PRL Part# HCR-INT-S1-BLK
3D scanning and silicone technology has allowed us to offer a stock replacement intake hose that is better looking, more durable and out performs the corrugated OEM intake hose. Our silicone intake hose is constructed of the same high quality 4-ply silicone as the rest of our couplers and features a perfectly smooth-finish transition for optimal air flow. The pleats found in the OEM hose makes disrupts air flow, which limits power potential and throttle response.

PRL FK8 Civic Type-R 17-18 Intake System (HIGH VOLUME)

PRL Part# HCR-INT-HVI
The PRL FK8 Civic Type-R High Volume Intake system utilizes a 6" cone filter and billet 2-piece MAF housing with velocity stack(s) to allow maximum airflow while delivering proper fuel trims. The HDPE rotomolded air box utilizes the factory air duct and seal for optimal airflow and heatsoak reduction. Custom molded 4-ply silicone allows for all components to be safely attached without obstructing airflow.

PRL FK8 Turbo Inlet Pipe Civic Type-R 17-19 (PRL HVI SYSTEM)

PRL Part# HCR-INT-TIP-HVI
*Titanium Finish Subject to Change

Fitment Notes:
FITS ALL 2017+ HONDA CIVIC TYPE-R MODELS INCLUDING RHD, INTERNATIONAL MODELS, ETC
FITS FACTORY INTAKE SYSTEM OR PAIR WITH OUR HIGH VOLUME INTAKE SYSTEM FOR OPTIMAL PERFORMANCE

TUNE RECOMMENDED

K&N Panel Air Filter FK8 Civic Type-R 17-19

K&N Part# 33-5070
2017-2019 Honda Civic Type R 2.0L Turbo FK8 Direct Replacement Filter

AFE PRO 5R OE Filter Replacement Civic Type R 17-19 FK8

Pro 5R Factory-Oiled Media for Maximum Performance
100% Polyurethane Frame On All Sides For Extra Long Filter Life
Washable and Reusable for Multiple Cleaning Cycles
Up to 24% increase in Flow
35mm Deep Rounded Open Pleats
Progressive Bump Seal Design for a Perfect Fit
AFE Part# 30-10277

AFE PRO Dry S OE Filter Replacement Civic Type R 17-19 FK8

Oil-Free, Pro DRY S 3-Layer Progressive Porosity Synthetic Media for Maximum
Convenience
100% Polyurethane Frame On All Sides For Extra Long Filter Life
Washable and Reusable for Multiple Cleaning Cycles
35mm Deep Rounded Open Pleats
Progressive Bump Seal Design for a Perfect Fit
AFE Part# 31-10277