K-Tuned Part # KTD-HS-06

K-Tuned Part # KTD-FPR-
Application: 92-95 Civic / 94-01 Integra, 96-00 Civic

K-Tuned Part # KTD-FPR-KFR
Note: Only fits K-Tuned k-series fuel rail

Hybrid Racing Part # HYB-FPR-00-05
• Piston-type design provides pressure damping
• Teflon coated, hard anodized, 6061 aluminum construction
• Stainless steel cap and hardware
• -8 Inlet/Outlet Ports
• -6 Return Port
• 1/8 NPT gauge port
• Includes all fittings needed to attach to -6AN fuel lines
• Includes mounting hardware
• Adjustable from 30PSI - 100PSI

AEM Part # 25-302BK . Adjustable Fuel Pressure Regulator (Black), for Universal Applications

Hybrid Racing Part # HYB-CAI-01-14
Full Silicone Construction
Most powerful RSX Intake on the market
True 3-inch tube design
Includes 3" velocity stack & filter
Requires the use of 70mm TB
Requires the RBC / RRC intake manifold

Hybrid Racing Part # HYB-CAI-01-02-C
• Full 3"/76mm inner diameter.
• Glass-reinforced silicone construction.
• Designed to keep intake air cold.
• Includes filter and all mounting hardware.
• Stainless steel t-bolt clamp.
• Works with PRB, RBC & RRC manifolds.
• Cleanest intake on the market.

K-Tuned Part# KTI-CA

K-Tuned Part# KTI-RAM-
The K-Tuned Ram Air Intake is the best K-swap intake in the industry.
NOTE: Only fits K-Swap cars (EG/DC2 or EK w/EKK2 mounts) using our passenger rad kit and RBC/RRC manifold.

K-Tuned Part # KTD-SMB-K20 & KTD-SMB-K24
Applications:  K20A/A2/Z1/Z3 and all K24A Series engines.
Note: The K24 post bracket is based off the CRV bracket (11910-PPA-000) and will only fit applications using the similar. Will work with most K24-Swapped vehicles including RSX and 8th Civic Si. (This will NOT fit Accord, TSX, Element chassis)

K-Tuned Part # KTD-PMB-K24
This K-Tuned K24 bracket is based off the CRV bracket (11910-PPA-000) and will only fit applications using the similar. Will work with most K24-Swapped vehicles including RSX and 8th Civic Si. (This will NOT fit Accord, TSX, Element chassis)

Required when doing K24 Swaps. Genuine Honda Part

Hybrid Racing Part# HYB-BUN-01-88
Helps to eliminate grinds during hard shifts
OEM Honda master cylinder
Stainless steel braided clutch line
Improves the feel of gear changes
OEM Slave Cylinder (NON-DAMPENED)

K-Tuned Part # KPB-K20-500-2
For All K20 engines

K-Tuned Part # KPB-K24-501
For All K24 engines

K-Tuned Part # KPB-K20-500

For All K20 engines

K-Tuned Part # KTD-SMP-K20 &  KTD-SMP-K24
Applications:  K20A/A2/Z1/Z3 and all K24A Series engines.

Innovative Mounts Conversion mounts for 1988-1991 Honda Civic/CRX. Designed to fit all K20 motors. Also designed to work when converting automatic to manual transmission swaps. Innovative Mounts Part# 99150

Innovative Mounts K-Series Conversion Driver's side Transmission Mount for 1988-1991 Honda Civic/CRX (ED/EF/EE). Part # 99110
Designed to fit the Honda ED/EE/EF chassis with K-Series engines & when swapping from automatic to manual hydraulic transmission.

Innovative Mounts K-Series Conversion Passenger Mount for 1988-1991 Honda Civic/CRX (ED/EF/EE) Part # 99120
Designed to fit the Honda ED/EE/EF chassis with K-Series engines & when swapping from automatic to manual hydraulic transmission.

Self locating bracket will need welding to frame.
(Note: This bracket is generally sold with the kit, however if you are reusing the kit from another vehicle you may need to purchase this again). Innovative Mounts Part # 99120-SB

Innovative Mounts K-Series Conversion Rear Mount for 1988-1991 Honda Civic/CRX (ED/EF/EE) Part # 99130
Designed to fit the Honda ED/EE/EF chassis with K-Series engines & when swapping from automatic to manual hydraulic transmission.

Innovative Mounts Conversion mount kit for 1992-1995 Honda Civic, Del-Sol, and 1994-2001 Acura Integra. Designed to fit all K20 motors. Also designed to work when converting automatic to manual transmission swaps. Innovative Mounts Part# 90150
Also Available in Billet

Innovative Mounts Conversion Passenger/Transmission Mounting Bracket for the 2002-2005 Honda Civic Si/Type-R (EP3) & 2002-2006 Acura RSX (DC5). Innovative Mounts Part # 90610-SB
Designed to replace the mounting bracket directly attached to the manual EP3/DC5 transmission.