K-Tuned Part # KTH-88-91 (Applications: 1998-1991 EF Civic & CRX)

Required when doing K-Series swaps. Available applications: 88-91 Civic/ CRX EF*, 92-00 Civic (EG/ EK) & 94-01 Integra DC. Brand new connectors and pins sourced from the same company Honda uses.

K-Tuned Part # KR-FRF-306
For use with K-Tuned fuel rails and factory fuel lines.

K-Tuned Part # KFR-FTS-53
For use with K-Tuned FPR

K-Tuned Part # KFR-B-52

K-Tuned Part # KTD-FF-06

K-Tuned Part # KTD-FF-08
Applications: All K-series engines, Universal

K-Tuned Part # KTD-MFF
Universal. Can be added to just about any AN fuel system.

K-Tuned Part # FLK-CF-LO
Applications: EG, DC2, EK with K-Series Swap

K-Tuned Part # KFR-FPG-B55

On some newer model Honda and Acura vehicles you might notice that Electronic Fuel Injection (EFI) style fittings are being used on several of the fuel system components. Typically these are found a bit more often on returnless fuel systems and more specifically on the fuel rail, fuel feed (firewall) hardline and we've also seen them used on some fuel pump hangers. These special adapter fittings are designed to quickly adapt a male EFI connection to a male 6AN fitting. This makes converting EFI parts to a custom AN fuel system very simple.

K-Tuned Part # FLK-C
Application: 06-11 Civic Si and 12+ Civic with RBC intake manifold swaps.

K-Tuned Part # FLK-R
Application: RSX, EP3, K-Swap EM2

K-Tuned Part # KR-FIT-CMFG

K-Tuned Part # KRP-1000

Direct bolt-on for all factory K-series cars.
KIT INCLUDES MOUNTING BOLTS AND CENTER MOUNT GAUGE.
ALSO INCLUDES EFI FUEL FITTINGS and IDLE AIR ASSIST VALVE DELETE KIT.
PERFECT SETUP FOR FACTORY K-POWERED CARS. K-Tuned Part # KRB-CMFG-KIT

Innovative Mount Kit for 1990-1993 Honda Accord. Designed to fit all K series motors. Works with either manual or automatic chassis.  Urethane stiffness from soft for the street to solid for the track is available. Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. All hardware is included. Part # 99352

Innovative Mounts is proud to be the first in the industry to release this application mount kit. Conversion mounts for 1990-1993 Acura Integra. Designed to fit all K20 motors. Also designed to work when converting automatic to manual transmission swaps. Part# 99350

Innovative Mounts K-Series Conversion Rear Mount for 1990-1993 Acura Integra (DB/DA). Part # 99330
Designed to fit the Integra DB/DA chassis with K-Series Engines & manual transmission.

Innovative Mounts Automatic to Manual Transmission Steel conversion mount (bracket) for 02-06 Acura RSX. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. Part # 40610-SB

NOTE: Does NOT work with JDM K20A throttle or BDL Performance throttle bodies. This will ONLY work with North American K20A2 and K20Z1 throttle bodies.

K-Tuned Part # KR-FRF-303
For use with all K-Tuned fuel rails.

K-Tuned Part # KR-CEN-0
For use with K-Tuned fuel rails only