This kit Includes 3 mounts; Front, Rear, & Passenger side mounts.
All New Innovative Mounts Paramount Series Completely Redesigned Bushings Allows For Less Engine Movement
The all new design uses a larger load bearing bushing which can support the mount on all sides resulting in less chance of mount failure, less vibration and allows for softer bushings for heavier engines and applications.
- Unique no-tear vibration minimizing.bushings
- CAD/CAM Designed
- Hardware Included
- Stress Analyzed
- Lifetime Warranty
Factory mounts are usually made of thin gauge metal stamped and partially inserted with a rubber material. The rubber usually has two or more sections that meet in the center to hold the center pin. These sections do not hold the motor firmly and are prone to break under sever driving conditions and/or when used in performance applications.
Innovative Mounts has engineered a unique polyurethane bushing unlike no other. Their bushings are solid, will never wear or break, and come with a life time unconditional warranty. A key design decision in Innovative bushings is that it makes minimal physical contact with the mounting bracket or chassis. The shape of the urethane bushing is tapered to prevent binding between the chassis and/or mounting bracket. This allows the urethane to gradually absorb engine movement and vibration.
All of Innovative bushings are designed in the same general shape. What varies next is the hardness or durometer rating of the urethane.
60A Red - The 60A Red bushings are recommended for street cars. Most of our kits come standard with these bushings. They provide the least amount of vibration transfered from the engine to the chassis. This equates to a more comfortable everyday ride.
75A Black - The 75A Black bushings come standard on all H/F - Series engines. These engines weigh more and need a stronger bushing. We recommend 75A for street and track vehicles that make more than average horsepower. This rating of bushing is also for those that would like a stiffer feel and less engine flex.
85A Grey - The 85A Grey bushings is designed specifically for race cars or drivers that seek a solid engine mount kit.
95A Red - The 95A Red Extreme pretty much race only... Figure these bushings are 95 out 100% solid
This is a complete replacement bolt-in kit but may need extra modification for the 04-08 TL.
extra modification to the sub-frame may be necessary to fit the front and rear mounts.
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
These Innovative Engine Mounts are built for performance driving. Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP. Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts. By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
*Please Note: Custom Finish Innovative Mounts are generally made upon order. Therefore, please allow at least 7 to 10 business days for shipment. If you would like to check the availability of a specific mount, please e-mail us or give us a call.