K&N Air Filter Intake INTEGRA GSR 1.8L 94-01 (ALL)

K&N
Add to cart
  • Description
  • More

K&N Part# 57-3509
K&N 94-01 Acura Integra GS-R L4-1.8L Performance Intake Kit

57 FIPK Air Intake 50 CARB EO Number: D-269-25

Fitment:
1994-2001 Acura Integra GS-R L4.1797cc B18C1 (with OEM Manifold)

K&N Fuel Injection Performance Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art.  K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine.  This is why some tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.


FEATURES

 * Guaranteed to Provide more HP and Increased Acceleration
 * Engineered to Specific Vehicle Design
 * Easy to Install, Usually in 90 minutes or less!
 * Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
 * Million Mile Limited Warranty
 * Replaces OEM Filter and Air Box
 * Air Filter is Washable and Reusable
 * Works with Original Equipment Manufacturer Computer Systems
 * Designed to use Factory Holes & Mounting Points Whenever Possible
 * Most are CARB Exempt and street legal in all 50 US States

When it was first developed in 1962, the K & N Filtercharger was a true design breakthrough in air filtration technology. Today, it still is. Because K & N Filtercharger can actually double air flow, which in turn, adds up to 15 % extra horsepower. The secret lies in the K & N Filtercharger's unique design. Conventional filters use paper or foam material permeated with millions of tiny, irregular passages, that screen dirt particles out of the air. Because the dirt particles are trapped inside the passages, they eventually clog; and when this occurs, airflow restriction increases dramatically. With the Filtercharger, a special cotton fabric is sandwiched between the pleated aluminum screen wires, The pleated design provides five times more filtering surface over the element circumference. The cotton / screen wire filter media is then saturated with a formulated air filter oil. Acting like a fluid curtain., this oil attracts particles of dirt and debris which build up on the outside of the filter. This buildup of dirt paticles suspended in oil creates more and more irregular passages that actually create an additional filtering barrier with use. Not until very fine particles close this secondary "filter layer" does the Filtercharger begin to clog. In most cases, up to 1/8 " of dust can cover a Filtercharger before performance is significantly affected. On a street driven vehicle, a Filtercharger can last up to 50,000 miles before service is required. Then because it's made of reusable materials, you can just clean it, apply fresh K & N Filter Oil and Re-install. Of course, K & N has developed biodegradable cleaning products designed to effectively clean the filter without harming the environment through the absence of fluorocarbons. More air flow, increased horsepower, and long lasting performance. Even after 35 years, the K & N Filtercharger is still on the cutting edge of air filtration technology.
Note: To make sure the exact match, please visit K&N website to search your vehicle application before order.

Generally Ships in 3-5 Business Days