Buddy club P1-RACING camber kit is specially designed for double-A suspension. Sophisticate design makes alignment more accurate. With the camber angle adjustment, the car will be more stable on the straight and has better control in the corner. The camber kit is made of light weight high strength materials with precise manufacture process. With many years of racing experience and numerous testing, The camber kit has extremely good performance and quality. The center section of the general camber kit is the weakest area; it could easily be distorted when the locking screw is tightening too hard. Buddy Club Camber kit use the special reinforced solid design which dramatically increase the strength of the camber kit. By using low profile joint, the P1-racing camber kit provides 5mm more clearance between the top of the camber kit and bottom of the strut tower. The low profile joint also featires cadmium plating for additional corrosion resistance. Standard camber kit does not have the reinforcement in the center area which can cause distortion when tightening the locking screw too hard or under severe stress. This may lead to accident or damage to other components on the vehicle.