K-Tuned Power Wire

K-Tuned Part# KTH-PWR-085
High grade power wire can be used for most k-series cars. It is designed to connect from the fuse box to the alternator. Overall length is approximately 85" long and can be cut to length. The kit comes with loom, heat shrink, ends, and labels. Not: Fuse box terminal has a 5mm ID hole and 12.5mm wide spade. Alternator ring terminal 10.5mm ID hole and 15mm OD. Ensure both sizes work for your application before purchasing.

K-Tuned Ground Strap (Pair)

K-Tuned Part# KTH-GWP-011
The K-Tuned ground wire kit includes two 11" long ground wires. These are great upgrade for old corroded and worn grounds. You want to run one from transmission to chassis and engine to chassis. Both connections should be to bare metal.

RW Ground Kit

Rywire Part# GROUND-KIT
The Rywire ground kit features:
- (1) 4 Gauge 20 inch long battery cable. (ring terminal style)
- (3) 8 Gauge 14 inch long ground wires.

The 3 shorter ground cables can be used for Front and Rear Transmission grounds as well as your Head/Valve cover ground.

AAAll grounds are protected with DR-25 high temp shrink.

GMB Honda B-Series VTEC Water Pump

Honda OE quality water-pump for Honda & Acura B-Series VTEC Engines. Recommended for OE direct replacement and LS/ B20 VTEC Application.

Buddy Club Racing Spec Electric Condenser 3

ECO HYBRID FRIENDLY Buddy Club Part #BC-04-RSCON3

Torque Solution 02-06 Acura RSX K-Series Black Billet Aluminum Engine Side Mount (RH Side Mount Only)

Torque Solution Billet Aluminum Engine Mount
Applications: Acura RSX 2002-2006 DC5 Base & Type-S, 2002-2005 Honda Civic Si (EP3) Part# TS-RSX-001

NRG Light Weight Simulator Steering Wheel (Splitz)

 NRG Innovations Part# ST-010**-PR
This steering wheel is designed to reduced weight by using light materials for gaming simulators to ensure all force feedback is felt through your hands. The steering wheel weights about the same as a carbon fiber wheel and with a small investment only. The style is a 1.5" deep dish 350mm spoke with slits in the middle.

70mm x 6 Bolt Pattern
350mm
1.5" Deep dish
Light Weight Construction for **Sim Racing
**Please Note: This wheel is not intended for automotive use

CUSCO EARTH GROUNDING KIT

Gains of up to 2.3HP & 2.2lbs. x ft. Torque on most applications

Chase Bays Raychem DR-25 Engine Ground Kit

Chase Bays Raychem DR-25 Engine Ground Kit Part#  CB-U-DRGRND