auth-etailer-logo

Skunk2 Accessories

Skunk2’s Fine Tuning products and accessories help put the finishing touches onto your vehicle you work so hard to make perform well. Accessories like Shift Knobs, Short Shifters, Forged Lug Nuts, Billet Oil Caps, and Silicone Radiator Hose Kits aren’t just functional but also help reveal to others the attention to detail you put into your vehicle. The same care we put into developing our high-performance engine, exhaust, and suspension components goes into the design and manufacturing processes of each Skunk2 accessory, and we make every effort to ensure that their style is consistent with our rich racing heritage.
Skunk 2 Billet oil caps are CNC machined to be extra lightweight. Each oil cap is fully polished & features a contrasting, acid-etched "S2" Racing logo. Part # 626-99-0070
Skunk2’s Fine Tuning products and accessories, like it's Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and high-performance parts manufacturing practices, each Black Series Billet Oil Cap is precision CNC machined and features Skunk2's signature, Black Series finish. Skunk2’s Billet Oil Caps feature a 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.
Hard Anodized Constructed from CNC-machined billet aluminum & features laser-etched logos on opposing sides. Skunk2 Part # 625-05-0060
Skunk2 Part # 625-05-0061
Compatible with OEM mounts as well as OEM and many aftermarket batteries.
Skunk2 Billet wire covers are CNC machined to be extra light weight. Each wire cover is fully polished & features a contrasting, acid etched Skunk2 Racing logo. Part # 632-05-2090
Skunk2 Part # 632-05-2091
The Skunk2 VTEC solenoid cover is precision CNC machined from aircraft quality 6061-T6 alluminum billet and features a durable gun metal or black anodized finish. A laser-etched Skunk2 logo wrap and “Skunk2 Inside” logo on top will accent your engine along with other Skunk2 accessories.* Will not fit JDM 88-91 engines. Part # 658-05-0210 (Gunmetal) 658-05-0215 (Black)
The Skunk2 cam seal is precision CNC machined from aircraft quality 6061-T6 alluminum billet and is gun metal anodized for a durable finish. The Skunk2 cam seal features three o-rings for a superior fit and seal compared to the factory plastic seal which has no o-rings. Includes a laser-etched Skunk2 logo design to make the Skunk2 cam seal a perfect addition to your engine along with other Skunk2 accessories. Part # 658-05-0200

Skunk2 Part # 660-99-0010
Brake/ Clutch Reservoir Cover

Skunk2 is proud to introduce the most unique, low-profile dress-up hardware you’ve ever seen. An original design, Skunk2’s Low Profile Valve Cover Hardware kits are the only ones designed specifically for B-series valve covers.

Low Profile Valve Cover Hardware kits are a comprehensive design, featuring specially engineered “standoffs” that include provisions for Skunk2’s unique, low-profile washers and flush-mounted, stainless steel hardware. Each kit includes 12 low-profile washers and 12 flush-mounted, stainless steel bolts. All kits are compatible with OEM valve covers as well as OEM and most aftermarket spark plug wire covers, including those from Skunk2.

Skunk2 Part # 649-05-012x
Skunk2’s Low Profile Valve Cover Hardware kits are the only ones designed specifically for K-series valve covers
Manufactured from 6061-T6 billet aluminum and hard anodized for durability, Skunk2 employs the same design and manufacturing methods for all of its Fine Tuning accessories as it does for its top-of-the-line racing components. Each Billet VTEC Solenoid includes flush-mounted hardware and a smooth, machined body for an attractive look. Skunk2’s Billet VTEC Solenoids help put that unique finishing touch onto the vehicle you work so hard to make perform well, and we make every effort to ensure that their style is consistent with our rich racing heritage. Part # 639-05-0105 (black) & 639-05-0100 (hard)
Skunk2 is proud to introduce its all-new Billet VTEC Solenoid for Honda's K-series in its exclusive, Hard Anodized and Black Series finishes. The first of its kind, Skunk2’s Billet VTEC Solenoid is designed to be used with any K-series engine (excludes '12 Civic Si) and is compatible with Honda’s original solenoid internals and gasket,
Skunk2 is proud to introduce its all-new Billet VTEC Solenoid for Honda's H-series VTEC engines in its exclusive, Hard Anodized and Black Series finishes. The first of its kind, Skunk2’s Billet VTEC Solenoid is designed to be used with any H22A cylinder head and is compatible with Honda’s original pressure sensor, solenoid internals, and gasket. Part # 639-05-0200 (hard) & 639-05-0205 (black)
The first of its kind, Skunk2’s Series Billet VTEC Solenoid is designed to be used with Honda's F20C1 and F22C1 cylinder heads and is compatible with Honda’s original pressure sensor, solenoid internals, and gasket. Billet VTEC Solenoids for Honda's F-series engines are available exclusively in a Skunk2 finish. Part # 639-05-0300 (hard) & 639-05-0305 (black)
Skunk2 Fender Washers were designed to replace the factory hardware with stainless steel bolts flush-mounted inside of our unique, hard-anodized aluminum washers. Each kit includes six low-profile washers, available in 20mm (large) and 16.8mm (small) diameters, and six flush-mounted, stainless steel bolts.
Skunk2 Part # 359-99-0020
Fitment:
1990 - 1993 Acura Integra (GS, LS, RS)
1992 - 1993 Acura Integra (GS-R)
1988 - 1991 Honda Civic Hatchback (DX, Std)
1989 - 1991 Honda Civic Hatchback (Si)
1988 - 1991 Honda Civic Sedan (DX, LX)
1990 - 1991 Honda Civic Sedan (EX)
1988 - 1991 Honda CRX (DX, HF, Si)
1997 - 2001 Honda Prelude (Base, Type SH)
1992 - 1996 Honda Prelude (S, Si)
1993 - 1996 Honda Prelude (Si VTEC)
1992 - 1994 Honda Prelude (Si 4WS)
Skunk2 Part # 359-99-0010
Fitment:
1997 - 2001 Acura Integra (GS, Type R)
1994 - 2001 Acura Integra (GS-R, LS)
1994 - 1999 Acura Integra (RS)
2002 - 2006 Acura RSX (Base, Type-S)
2004 - 2008 Acura TSX (Base)
1990 - 1997 Honda Accord (DX, EX, LX)
1991 - 1993 Honda Accord (SE)
1993 - 2010 Honda Civic Coupe (DX, EX)
2001 - 2010 Honda Civic Coupe (LX)
1999 - 2010 Honda Civic Coupe (Si)
1996 - 2005 Honda Civic Coupe (HX)
1992 - 2000 Honda Civic Hatchback (CX, DX)
1992 - 2005 Honda Civic Hatchback (Si)
1992 - 1995 Honda Civic Hatchback (VX)
1992 - 2010 Honda Civic Sedan (DX, EX, LX)
2007 - 2010 Honda Civic Sedan (Si)
1998 - 2004 Honda Civic Sedan (GX)
1993 - 1997 Honda del Sol (S, Si)
1994 - 1997 Honda del Sol (VTEC)
2003 - 2008 Honda Element (2WD EX, 4WD EX)
2004 - 2008 Honda Element (2WD LX, 4WD LX)
2003 - 2004 Honda Element (2WD DX, 4WD DX)
2007 - 2008 Honda Fit (Base, Sport)
2000 - 2009 Honda S2000 (Base)
2008 - 2009 Honda S2000 (CR)
Skunk2 now offers B-Series VTEC solenoid block off plate for applications where the VTEC solenoid is no longer used. This plate is CNC machined from 6061 aluminum and comes with mounting hardware. Available in either black or raw finish. Utilizes the factory gasket with the screen removed. Part # 639-05-0605 (black) & 639-05-0600 (raw)
Skunk2 Part # 657-05-0030
The first of their kind and only available from Skunk2, Lower Control Arm Dress-Up Washers for most ’88-’00 Civics and ’90-’01 Integras are available in black, blue, gold, purple, red, and clear hard-anodized finishes. Lower Control Arm Dress-Up Washers substitute the factory lower control arm hardware with tapered, OEM-grade socket-head bolts flush-mounted inside of our unique aluminum washers. Each Lower Control Arm Dress-Up Washer kit includes six washers and six bolts that are compatible with most lower control arms, including Skunk2’s.