90-93 Integra H-Series Mounts

Innovative Mounts for 90-93 Acura Integra (DA/DB) with an F-Series or H-Series Engine Swap

Innovative Mounts 90-93 Acura Integra H22 Mount Kit

Innovative Mounts Part # 29354 With this Innovative Mount kit, you can now put an H22 into your 90-93 Integra with very little modification. Designed to fit all H/F Series motors. Positions the motor with no axle bind. Advanced Actuator pivots smoothly using state of the art spherical bearings. The actuator is mounted in the same fashion as the factory models and works in the same plane as the clutch release fork. There is no binding in the clutch release fork and therefore no premature clutch wear caused by the actuator.
!

Innovative Mounts H Series Cable to Hydraulic Actuator

Designed for H-Series engines with a H-Series or F-Series hydraulic transmission when being installed in a cable type chassis. The actuator will convert from cable to a hydraulic transmission. 100% bolt in, no modifications required. Actuator mounts in front of the release fork. There is no binding or premature clutch/transmission wear. CAD/CAM Designed. Stress Analyzed. Lifetime warranty . Innovative Mounts part # 41003
Add to cart
!

Innovative Mounts H/F-Series Rear T Engine Bracket for 92-00 Honda Prelude & EG/DC/EK Swaps

Innovative Mounts Rear Engine Bracket for 92-95 Honda Civic, 94-01 Acura Integra, 93-97 del Sol with F/ H Series Engine Swap & Replacement Mounting Bracket for 1992-1996 M/T H22A Honda Prelude (BA/BB)
Innovative Mounts Part # 59630
Add to cart
!

Innovative Mounts 90-93 Acura Integra H-Series Swap Axles

Innovative Mounts H-Series & F-Series Swap Axles for 90-93 Acura Integra (DA/DB) with an F-Series or H-Series Engine Swap
Add to cart
!

Innovative Mounts H Series Alternator Relocator Bracket # 59185

Innovative Mounts H Series Alternator Relocator Bracket is designed to relocate an H Series Alternator. Ideal for all H Series swaps and H2B conversions. Lowers the factory H22 Alternator to where the AC compressor was originally mounted. Fits both standard and 1/2" offset for use in applications where balancing shafts have been removed. Lifetime warranty. Note: Uses a 32" belt. Part # 59185
Add to cart
!