65

BLOX Camber Kits

BLOX adjustable front camber kits are designed to replace the whole factory A-Arm allowing up to +- 4 degrees of camber adjustment. They come equipped with high quality ball joints and nuts able to withstand track abuse as well as the rigors of everyday street driving. Will fit all 92-00 Honda Civics & all 94-01 Acura Integras, including the Type R.

BLOX Rear Camber Kit for the Acura Integra, Honda Civic, Honda CRX and Honda Del Sol offers is sold in pairs for both sides. These high quality BLOX Rear Camber Links allow you to adjust your rear camber up to 5 degrees to get your wheels straight again! This is a must have for lowered vehicles who need to fix their rear camber.

BLOX Adjustable Front Camber Kit 94-01 Integra, 92-95 Civic

BLOX Adjustable Front Camber Kit 96-00 Civic

BLOX Racing - Competition Series Adjustable Front Camber Kit (Sliding Ball Joint)

BLOX Racing’s Competition adjustable front camber kits are designed to replace the vehicle’s factory upper control arms.  BLOX Racing adjustable front camber kits allow the user to adjust and fine tune the front suspension’s camber settings for optimum driving and cornering performance.  By properly adjusting the front camber settings, premature and uneven tire wear can be reduced while greater tire contact patch can be created. BLOX Part # BXSS-20208

BLOX Rear Camber Kit Civic / Integra

BLOX Part # BXSS-20101
Fitment: 88-00 Honda Civic/ CRX/ Del-Sol 90-01 Acura Integra
FREE Shipping

BLOX Racing Front & Rear Camber kit Package

Package Includes: BLOX front camber kit and BLOX rear camber kit.

BLOX Racing adjustable rear toe kits 92-00 Civic/ 90-01 Integra

BLOX Racing adjustable rear toe kits are designed to allow the suspension tuner to quickly adjust the toe settings. Part # BXSS-20102

Fits 92-00 Honda Civic & 90-01 Acura Integra

BLOX Rear Toe Kit 1988-1991 Honda Civic, CRX

BLOX Racing Part # BXSS-20103
BLOX Racing adjustable rear toe kits are designed to allow the suspension tuner to quickly adjust the toe settings.

BLOX Racing - Replacement Ball Joint (Front, 1PC)

BLOX Racing offers replacement ball joints for its front adjustable camber kits. Ball joints include all hardware but are sold individually. BLOX Part # BXSS-20201-BJ

BLOX Competition Series ball joint (1PC)

The BLOX Competition Series ball joint works directly with the current BLOX Racing front adjustable camber kit. The Competition Series ball joint makes camber adjustments easier and quicker for performance enthusiasts, where saving time is critical at the track or road course. Camber adjustments can now be made from underneath, leaving more space between the top of the camber arm and wheel well. The top reinforcement plate provides additonal strength and unsures that the ball joint remains in place

BLOX Rear Camber Kit Bushings

BLOX Racing Part # BXSS-20207
BLOX Racing replacement bushings for its rear camber kits. Each set includes replacement bushings for one arm.

BLOX ROLL CENTER ADJUSTER - EXTENDED BALL JOINT CIVIC 06-11 (FRONT)

BLOX Racing - Toll Center Adjuster Extended Ball Joint (Front Pair), for Honda Civic 06-11 Part # BXSS-20003

BLOX Spherical Bearing Kit (Front LCA) - 2002-2005 Honda Civic EP3, 2006-UP Honda Civic; 2002-2006 Acura RSX

BLOX Racing offers spherical bearing kits that significantly increase suspension performance. The front lower control arm bearing kit is a direct replacement for the large and weaker factory bushings. These spherical bearings will increase the front suspension feel, input and response while limiting wheel hop and traction loss.

BLOX Racing spherical bearing kit 88-00 Civic 90-01 Integra

BLOX Racing offers spherical bearing kits that significantly increase the vehicle's suspension performance. The rear trailing arm spherical bearing kit directly replaces the factory's soft, rubber bushings.  The factory bushings contribute to the "sloppy" feel experienced by many during hard driving on road courses and race tracks. BLOX Part # BXSS-20300