Battery Stabilizers

ECO HYBRID FRIENDLY Buddy Club Part #BC-04-RSCON3

Gains of up to 2.3HP & 2.2lbs. x ft. Torque on most applications

CTEK Part# 40-206
CTEK Battery Charger - MXS 5.0 4.3 Amp 12 Volt

Torque Solution Billet Aluminum Engine Mount
Applications: Acura RSX 2002-2006 DC5 Base & Type-S, 2002-2005 Honda Civic Si (EP3) Part# TS-RSX-001

NRG Innovations EPAC-400 Volltage Stabilizer

NRG Innovations Part# SRK-222SL-SL
Features:
2.5" in Depth
Race inspired intricate cutout
Horn wires included
Raised ring for faster release
6x70mm & 6x74mm bolt pattern on the steering wheel side

EMI 92-00 Honda Civic / 90-01 Acura Integra Shift Linkage designed to fit the the fifth/sixth gen. Honda EJ/EH/EG/EK and second/third gen. Acura DA/DB/DC chassis with a B-Series engine (B16/17/18).

This Standalone harness was designed for a GM LS3 engine and E38 computer with manual transmission. All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire shielding. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations.
Rywire GM LS3 V8 E38 ECU Engine Harness w/Bosch MAP Option (Req PDM/Fuse Box/Mating Connector) Part# RY-LS3-E38

The Ground Wire Systems centralize the grounding point of the electrical mechanisms on the vehicle. By installing onto the battery's negative terminal or chassis for proper grounding. Ground Wire Systems cause less fluctuation on the electrical system, improves overall performance and responsiveness of the engine end electrical components. These are must-have for any vehicle with engine swap since proper grounding tends to be an issue associated with that type of performance modification. It Features a copper center hub and high quality 12 gauge low resistance wires available in red or blue.