Shift Boxes

K-TUNED BILLET SHIFTER BOX RSX/EP3/ES & K-SWAP EF/EK/EG/DC2

K-Tuned Part # KTD-RSX-SFT
For 2002-2006 RSX, 2001-2005 Civic EM2/ES, K-swapped EF, EG, EK, DC2 Applications

Hybrid Racing K-Series Swap Bolt-In Short Shifter

HR Part # HYB-SAS-01-05
• Shift knob not included with shifter
• Stainless Steel and Aluminum Construction
• Adjustable throw from 90%-40% of stock throw for both front/back and left/right motion
• Knob is height adjustable
• Central shaft features unique splined design for added knob placement adjustability
• Designed to use stock RSX or Hybrid Racing shift linkage
• 432 Possible Configurations!
• Accepts M10x1.5 shift knobs (standard Honda/Acura shift knob thread)

K-TUNED NO-CUT SHIFTER K-SWAP DA/DC2/EF/EG/EK

K-Tuned Part # KTD-NC-SFT
Applications: K-Swapped EF, DA, EG, DC2 and EK chassis.

K-TUNED SHIFTER MOUNTING KIT DC2/EG/EK

Part # KTD-SPL-01

K-TUNED K20Z3 TRANS CONVERSION KIT DC2/EG/EK W/K-SWAP (W/ SHIFTER CABLE BKT)

K-Tuned Part # KTD-SPL-ACC

K-TUNED BILLET SHIFTER ARM

Fits oem DC5 RSX shifter boxes from K20A/A2/A3/Z1 engines.
Note: Does not fit NEW Buddy Club and Revo shifters
Part # KTD-BIL-ARM

K-TUNED SHIFTER BASE PLATE

Part # KTD-BIL-SHP
Note: This shifter setup does not clear any interior panels or center consoles on any chassis.

K-Tuned Accord Shifter Base Plate

Part # KTD-BIL-ACC
Required OEM Parts (Not Included)
Accord Shifter Box : 54100-SDA-A01
Accord Shifter Cable Set : 54310-SDA-L02

K-TUNED SHIFTER BOX BUSHINGS

Part # KTD-SFT-BUS
For All RSX Shifter boxes

K-Tuned Billet Shifter Stops

Part # KTD-SFT-STPS

Must be used with the K-Tuned Billet RSX Shifter.

K-TUNED SHIFTER PIVOT BALL & SPRING

Part # KTD-PB-SPRG
Fits oem DC5 RSX shifter boxes from K20A/A2/A3/Z1 engines.

Blackworks Racing K-Series RSX Shifter Kit for 92-00 Civic and 94-01 Integra

BlackWorks Part # BWAC-SS600
Features:
Precision machined from aircraft grade aluminum
Stainless hardware for corrosion resistance and strength
Hard anodized black finish
Laser engraved BWR logo and serial number
No interior modifications necessary
Maintains stock shifter location
Engineered to precisely mate with the chassis tunnel of your vehicle

Private Label MFG POWER DRIVEN FULLY ADJUSTABLE SHIFTER (K-SWAP)

The Private Label Mfg Kswap Fully Adjustable shifter is constructed with high quality alloy steel and BILLET ALUMINUM for maximum durability and reliability to ensure the shifter will last. The added weight of the shifter results in smoother and more positive shifting with the ergonomic design that just falls into your hands, to the very first ultra-smooth shift.  The shifter was designed to have an adjustable ratio as the stock shifter to an more aggressive feel. The shifter is fully height adjustable to accommodate each drivers desired position, as every driver is different. The shifter certainly does not look stock, but the shift feel and throw can be adjusted like the stock shifter. The Shifter was designed so you would not need to cut the exhaust tunnel in the following applications:
EG, EK, DA and DC2(88-00 Civics and 90-01 Integra) chassises with K-swapped motors. 
PLM Part # PLM-SHIFTER-KSWAP

Hybrid Racing K-Swap RSX DC5 Shifter Mounting Plate

Hybrid Racing Part# HYB-SMP-01-05
Anodized billet aluminum
Fits EF/EG/EK/DA/DC
Mounts DC5 shifter directly to chassis
Rubber lower seal
Includes all stainless hardware
Race tested

ASR Dog Bone Shifter

The ASR Shifter Relocator (aka. Dog Bone Shifter) was designed with the idea of optimal driver position. Made out of high grade 6061-T6 Aluminum it is lightweight and strong for all you guys that like to go full chile. Using the ASR Dog Bone Shifter means you do not need to buy a $150+ shifter to simply relocate the shift knob closer to you. Part# ASR-EK-DB-01