AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes.

Grams Performance Fuel Inectors

Seeing The Exact Fuel Pressure On Your Vehicle Can Mean The Difference Between Extracting The Most Performance Safely And Expensive Failures. A fuel Pressure Gauge Will Precisely Measure Your Exact Fuel Pressure At Levels

Skunk2’s Composite Fuel Rails are made using a proprietary carbon-impregnated, aerospace thermo-polymer composite - a material that is 33-percent lighter, 60-percent stronger, and operates up to 100-degrees (F) cooler when compared to aluminum. The Composite Fuel Rail insulates fuel from both radiant and conductive heat transfer underneath the hood better than aluminum, resulting in increased horsepower and torque.

AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

BLOX Racing fuel injectors begin with brand new, Bosch™ fuel injector cores. Using the latest injector technologies, each high impedance injector is match tested so each set guarantees an accurate flow each time. High impedance, also referred to as saturated, injectors require less current to operate thus reducing the amount of heat generated during each cycle allowing the injectors to stay cooler.

The K-Tuned multi-port fuel rail is by far the best looking rail on the market. Using positive customer feedback and the demand to expand our fuel system parts line-up we have added a center port to our popular K-series fuel rail. With many years of R&D and racing history we have designed this third port to be used as an optional 6AN or 8AN center port fitting can also be used as the fuel feed on stock or all motor engine set-ups to hide or ñtuckî the line for the very popular stealth look.

Hard anodized finish can be used with all fuels including alcohol, E85 and other race fuels.

The fuel pressure regulator is often overlooked, but a very critical component in a vehicle’s fuel system. Without a reliable and consistent fuel pressure, your ECU has no way of knowing how much fuel it is injecting into each cylinder. Most conventional fuel pressure regulators use a bladder-type design. Although the bladder-type design is cost-effective and reacts to disturbances quickly, those bladders often lead to significant pressure fluctuations, which are manifested as a bouncing needle on your pressure gauge.

TI Automotive is the builder of the most popular fuel pumps and modules for over 60 years under the Walbro brand name. We value this heritage and are proud to continue our legacy of reliability, performance and first-time fit.