Evolution Alternator relocating bracket for F/H2B swap

Evolution Industries Alternator relocating bracket for F/H2B swap, or standard H22A applications. The kit will work with H-Series or D-Series alternator. Part # 27408
Add to cart
!

Innovative Mounts H Series Alternator Relocator Bracket # 59185

Innovative Mounts H Series Alternator Relocator Bracket is designed to relocate an H Series Alternator. Ideal for all H Series swaps and H2B conversions. Lowers the factory H22 Alternator to where the AC compressor was originally mounted. Fits both standard and 1/2" offset for use in applications where balancing shafts have been removed. Lifetime warranty. Note: Uses a 32" belt. Part # 59185
Add to cart
!

Evolution PCV Valve Extension

Evolution Industries Billet Low profile PCV valve extension. Part # 28322

Add to cart
!

SFR 4 Bar MAP Sensor K-Series (Black)

SFR Part# SF-01-018
SpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
Add to cart
!

Evolution Industries H2B Race Flywheel

Designed for use with Evolution H2B Conversion Kits.
Evolution Industries Part # 23208

11.5 lbs

Add to cart
!

Evolution Industries H-Series Replacement Crank Pulley

Evolution Version 2 Crank Pulley Part # EV-26634
- Precision machined from superior T7075 aircraft grade aluminum.
- Weighs 1.95 pounds versus 5.610 stock, saving you over 3 ½ pounds of rotational mass!
- Hard coat anodized and laser engraved for added wear resistance and longevity.
- Made to be used with stock H22 alternator ( 6-rib pulley)
- Measures at 6.1 inches versus 6.6 inch stock..
- Proudly made right here in the U.S.

Add to cart
!

Evolution Industries H-Series Crank Pulley

Evolution H22A/ H2B *Version 1 Crank Pulley. Part # 26630
Add to cart
!

Evolution Industries H22A Balance Shaft Cover Plate

Rear Balance Shaft Gear Cover Plate. Evolution Part #28320
Add to cart
!

Evolution Industries Half Shaft B-Series

Half shaft B-Series for H2B swap, or a B-Series (Hydro Type) replacement. Made out of 4140 chromoly which makes it lighter and stronger than OEM.

Add to cart
!

Evolution Industries H2B Pillow Mount (HalfShaft Adapter)

Evolution Industries Part # EV-26108-P

Evolution Industries H2B Half-Shaft (Intermediate Shaft) adapter. For use with Evolution H2B Conversion Kits. Adapts a B-Series Halfshaft to an H-Series Block and B-Series Transmission.

Add to cart
!

KAIZENSPEED H-Series Balance Shaft Eliminator Kit

The KAIZENSPEED balance shaft eliminator kit includes ALL necessary parts to cleanly eliminate your balance shafts for ALL H-series and F-series engines!
!
Add to cart
!

KAIZENSPEED H22 Timing Tensioner

KAIZENSPEED’s Version 2 H22 Timing Belt Tensioner directly replaces the stock H22 auto tensioner and eliminates the annoying H23 manual tensioner conversion. CNC
machined from billet aluminum with a Stainless Steel tension rod and jam
nut. No special adjustment wrench is needed with our tensioner!.

!

KAIZENSPEED Balance Shaft Eliminator Install Kit

The KAIZENSPEED Balance Shaft Eliminator Install Kit includes all the necessary gaskets to install your KAIZENSPEED Balance Shaft Eliminator Kit
!

KAIZENSPEED Balance Shaft Eliminator Kit (installed in oil pump)

Now you can get a brand new OEM Honda Oil pump with the KAIZENSPEED Balance Shaft Eliminator kit already installed in it! We take the headache out of pressing the plugs into the oil pump because we do it for you. We ensure a perfect installation, saving you time and money. KAIZENSPEED uses only OEM Honda oil pumps in everything from street cars to our 1200 horsepower Outlaw EK. Our Balance Shaft Eliminator Kit is included and only the girdle plugs need to be installed. They have done the oil pump for you!
!

BLOX EGR Block Off Plate (Black)

The BLOX Billet Aluminum EGR Block Off Plates allow you to seal the EGR passages in your intake manifold for off-road racing use. Part # BXEX-00010-BK
Add to cart
!

Skunk2 H2K Intake Manifold Adapter

Skunk2’s all-new H2K Intake Manifold Adapter now offers H-series enthusiasts even more flexibility. Thanks to Skunk2’s 6061-T6 billet aluminum manifold adapter, any K-series intake manifold, including individual throttle bodies as well as Skunk2’s Pro Series manifolds, can be bolted onto any H22A cylinder head. Part # 307-05-0305
Add to cart
!

Skunk2 K2B Throttle Body Adapter

Skunk2’s all-new K2B Throttle Body Adapter now offers H-series enthusiasts even more flexibility. Thanks to Skunk2’s 6061-T6 billet aluminum adapter, any B/H-series throttle body can be bolted onto any RBC-style K-series intake manifold, which is particularly useful when combined with Skunk2's H2K Intake Manifold Adapter. Part # 309-05-0005
Add to cart
!

OEM Honda Prelude H22A VTEC Oil Pump

H22A DOHC VTEC OEM Genuine Honda Oil Pump
!

KAIZENSPEED H2B Oil Pan

KS Tuned H2B Oil Pan designed specifically for H2B swaps.
!

Competition Clutch Super Single Clutch Kit (4S-80142-C) H2B Clutch & Flywheel Combo

SUPER SINGLE HONDA H2B SERIES. Competition Clutch Part# 4S-80142-C
Only works with an H2B swap. H22A Engine in combination with B series transmission.
* Note Flywheel Spacer may be required depending on the H2B kit being used.
Add to cart
!

MFactory MF-TRS-05H22 Helical LSD Prelude / Accord (92-01)

MFactory Helical LSD H22 H23 F22 F23
MFactory Part# MF-TRS-05H22
Fitment: 1992-2002 Honda Accord F-Series and 1992-2001 Honda Prelude H22A
Add to cart
!
!

Password:JDM Hood Risers: Civic / Integra

Do you have an engine swap in your Honda project car and it rubs the underside of the hood? Eliminate this problem with our all-new Password:JDM Billet Aluminum Hood Risers Kit. Our hood riser kits are machined in house, in the USA, and are available in your choice of anodized finish. Each spacer is laser etched with the Password:JDM Logo. Our kit includes two hood riser, and four zinc plated hex bolts. Our hood riser kit will raise your hood 3/4".
!